Amphion One12 Pair
€1,639.00*
The One12 studio monitor utilises a 1″ (25mm) titanium dome tweeter set in a Corian waveguide. The tweeter is meticulously aligned with a 4.5” (115mm) woofer, delivering surprisingly tight and even lows for speakers with such a small footprint. This approach, together with a very low crossover at 1600 Hz, ensures a rock-solid “phantom” center image, exceptional time and phase coherence, spectacular 3D soundstage and imaging, and an extremely wide and deep sweet spot.
These small One12 monitors provide an amazingly correct translation to much bigger mixing and mastering studio systems, home audio setups, or even large PA systems. Many other monitors fall apart at low listening volume, but the One12 sounds equally solid at any volume.
The One12 monitors are a perfect fit for home studios, small post-production edit bays, mobile trucks, or FOH where space is a precious commodity. Designed for any pro audio application, in the studio, or on-the-go, these extreme-nearfields take the room out of the equation and allow you to listen to the pure music – and not affected by the surrounding acoustics. One12 studio monitors are like a large pair of high-resolution headphones which are very comfortable to wear all day long but also allow sharing the experience with the whole production team.
Amphion One15 Pair
€2,179.00*
One15 studio monitors are pure and authentic across the whole frequency spectrum. They offer an impressive stereo image, keeping the accurate balance even at low listening levels. These monitors translate perfectly to any other playback system, saving you time from additional checks and amendments.
Be it for tracking, mixing or mastering, One15 studio monitors are the optimum affordable nearfield monitors. Providing clear and transparent mids, smooth highs, and an incredibly honest bass response, the One15 can easily fit in any musician’s set up, even in those, demanding extra clarity in the low-frequency spectrum.
Any pro-monitoring setup could benefit from Amphion One15s. These high-end passive monitors employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound needed to make critical mixing decisions.
Every tool a sound engineer or producer uses, either helps to make the final product better or allows working quicker. But with the One15 studio monitors, you can do both. Make better decisions faster no matter if you are composing, tracking or mixing. The One15 nearfield monitors are equally suited to the commercial or home studio environment.
Amphion One15 Pair (B-Ware)
€1,769.00*
One15 studio monitors are pure and authentic across the whole frequency spectrum. They offer an impressive stereo image, keeping the accurate balance even at low listening levels. These monitors translate perfectly to any other playback system, saving you time from additional checks and amendments.
Be it for tracking, mixing or mastering, One15 studio monitors are the optimum affordable nearfield monitors. Providing clear and transparent mids, smooth highs, and an incredibly honest bass response, the One15 can easily fit in any musician’s set up, even in those, demanding extra clarity in the low-frequency spectrum.
Any pro-monitoring setup could benefit from Amphion One15s. These high-end passive monitors employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound needed to make critical mixing decisions.
Every tool a sound engineer or producer uses, either helps to make the final product better or allows working quicker. But with the One15 studio monitors, you can do both. Make better decisions faster no matter if you are composing, tracking or mixing. The One15 nearfield monitors are equally suited to the commercial or home studio environment.
Amphion One18 Pair
€3,269.00*
Amphion’s One18 studio monitors offer a wide sweet spot and pinpoint-accurate imaged sound. This allows for fast and accurate creative decisions. Whether you are writing music, recording, or mixing, the One18 loudspeakers can be your creative weapon-of-choice. Thanks to their natural tone and balanced frequency response you can enjoy 12-hour-long sessions, with no ear fatigue.
Extremely detailed but not bright or harsh, the One18 studio monitors allow you to achieve great results quicker and without any doubt. Their perfect translation to any other listening system or environment brings no surprises when auditioning your work outside of your studio.
While being remarkably accurate, One18 monitors are strikingly musical and able to translate not only the finest mixing details but also the most delicate acoustic emotions. This results in an effective and deeply enjoyable music-creating process.
The Amphion One18 studio monitor offers premium performance for critical monitoring sessions. These high-end passive monitors employ a custom-designed 6.5″ (180mm) woofer, a fast-response titanium tweeter, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
Amphion One18 Pair (B-Ware)
€2,529.00*
Amphion’s One18 studio monitors offer a wide sweet spot and pinpoint-accurate imaged sound. This allows for fast and accurate creative decisions. Whether you are writing music, recording, or mixing, the One18 loudspeakers can be your creative weapon-of-choice. Thanks to their natural tone and balanced frequency response you can enjoy 12-hour-long sessions, with no ear fatigue.
Extremely detailed but not bright or harsh, the One18 studio monitors allow you to achieve great results quicker and without any doubt. Their perfect translation to any other listening system or environment brings no surprises when auditioning your work outside of your studio.
While being remarkably accurate, One18 monitors are strikingly musical and able to translate not only the finest mixing details but also the most delicate acoustic emotions. This results in an effective and deeply enjoyable music-creating process.
The Amphion One18 studio monitor offers premium performance for critical monitoring sessions. These high-end passive monitors employ a custom-designed 6.5″ (180mm) woofer, a fast-response titanium tweeter, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
Amphion Two15 Pair
€4,359.00*
Spend more time creating and less time re-mixing. With Amphion Two15 studio monitors you do not need to check your mixes on various other systems anymore. Two15 loudspeakers ensure that your mixes sound identical outside the studio as they do in your own.
No matter if you are composing or mixing, Two15 deliver you the musical detail you need in order to make the right creative decision. These speakers are able to draw out the finest spatial details without masking the big picture. Two15 studio monitors present dynamic, frequency and transient content in extreme resolution.
Two15 loudspeakers truthfully reproduce the material with all engineering nuances while retaining the musical emotions present and vivid. This allows for highly effective, fast and intuitive work, which still keeps the fun as a part of the process.
The dual LF/MF drivers of Two15 studio monitors work together in perfect phase alignment to reproduce a wide sonic range with exceptional accuracy. These high-end passive speakers employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.
Amphion Two18 Pair
€6,499.00*
Amphion Two18 studio monitors are Choice #1 for a number of A-list composers, sound engineers, and producers. The Two18 monitors bring them the confidence that their work will translate accurately to the outside world. These loudspeakers provide a neutral presentation, with a phase-accuracy and imaging that is second to none.
Whether you are composing, tracking, mixing, or mastering, the Two18 studio monitors are the perfect tool to assist you finishing your work both faster as well as achieving premium results. These transparent and elegantly-truthful studio monitors are perfectly balanced, and easily respond to any acoustic environment, personal tastes, or music genre.
The Two18 monitor provides very clear definition – particularly space and sonic placement, and even frequency response and dynamic changes. They remain full and sonically constant at lower listening levels, making them ideal for long-haul mix or mastering sessions. The Two18 studio monitors provide exceptionally precise imaging and a wide sweet spot, keeping the sound well-balanced even when you move around the room.
Amphion’s Two18 is a high-end passive monitor that employs custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver natural, transparent and un-hyped sound. The dual LF/MF drivers work in tandem with precise phase alignment to reproduce a wide sonic range with exceptional accuracy.
ATC SCM20PSL Pro MKII
€3,799.00*
Overview
Compact very high performance passive 2-way studio monitor
Ideally suited to:
– critical near-field listening applications in all control rooms– LCR surround monitoring in small-to-medium control rooms– surround channels in medium-to-large control rooms
Proprietary ATC 150mm/6” Super Linear Mid/Bass Driver
Proprietary ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter
Wide, even dispersion
Specifications:Drivers: LF 6.5”/150mm Super Linear, HF 1”/25mm Dual-Suspension ‘S-Spec’ TweeterAmplitude linearity : 80Hz – 20kHz (+/-2dB)Cut-off frequencies : 55Hz – 25kHz (-6dB freestanding)Dispersion : +/-80° coherent horizontal, +/-10° coherent verticalMaximum continuous SPL : 108dB (per pair @ 1m)Crossover frequency : 2.5kHzRecommended Amplifier Power: 75 to 300 WattsNominal Impedance : 8 OhmConnectors : 2 x Pairs Binding Posts/4mm Plugs – Bi-WireableCabinet Dimensions (HxWxD) : 450x250x294mm (17.7″x9.8″x11.6″)Weight : 18kg/39.7lbs (per cabinet)
Auratone 5C Super Sound Cube , classic wood
€379.00*
After lengthy testing and remanufacturing our driver, we finally were able to achieve the purest sound equalling the sound of the original 5C Super Sound Cube. All componets of our driver are made of the highest quality materials in the United States. The cabinet is built with black laminate and quality craftsmanship.
The 5C, which became famous in the 1970's and 80's and has been used in virtually every major recording studio worldwide, is still the undisputed industry standard for "real world" referencing in the recording studio.
Durability, flat full-range response, amazing power handling and portability have made AURATONES the Recording, Broadcasting, and Motion Picture industries favorite “mixdown monitors.” . . . for comparison and final mixes, auditioning, remotes, and reference standard speakers.
Auratone 5C Super Sound Cube, black
€379.00*
After lengthy testing and remanufacturing our driver, we finally were able to achieve the purest sound equalling the sound of the original 5C Super Sound Cube. All componets of our driver are made of the highest quality materials in the United States. The cabinet is built with black laminate and quality craftsmanship.
The 5C, which became famous in the 1970's and 80's and has been used in virtually every major recording studio worldwide, is still the undisputed industry standard for "real world" referencing in the recording studio.
Durability, flat full-range response, amazing power handling and portability have made AURATONES the Recording, Broadcasting, and Motion Picture industries favorite “mixdown monitors.” . . . for comparison and final mixes, auditioning, remotes, and reference standard speakers.
Avantone MixCubes Passive Mono Black (pair)
€379.00*
Avantone MixCubes Passive Mono BlackThe Avantone MixCubes are shielded, full-range studio mini-reference monitors. Their design is inspired by the legacy of the 5C Sound Cubes used in virtually all-major studios for the last 25 years.Features
5.25 inch Shielded Passive Full range 8 ohm drivers
6 1/2 inch Cube Cabinet with multiple coats of Retro-Cream High Gloss lacquer finish
Precision-milled high-rigidity MDF Cabinet sides & Baffle for low resonance
Radiused corners & edges reduce edge diffraction for better imaging
Custom Paper Cone is crafted using New Zealand pulp with mica fibers added for light weight & rigidity
Cloth surround made in Japan to uniform thickness tolerances
Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel
The 43oz. low distortion motor structure magnets are Y- 40 GRADE (MIL-SPEC)
High-Rigidity DIE CAST Aluminum frame with polished mounting bezel
Nickel Plated high-end binding posts (properly spaced for dual banana plugs)
Anodized milled Aluminum Terminal Plate
1/4 inch soft Neoprene Pad is recessed into the cabinet base to serve as a non-skid acoustic isolator
Standard size (5/8 inch- 27 threading) female microphone stand mount is built into the cabinet base
Geithain ME 100 / ME 100C
€1,550.00*
Das 6,5 Zoll Tiefton- und 1 Zoll Hochtonsystem des passiven 2-Wege-Koaxiallautsprechers ME 100 sind in einem Bassreflexgehäuse integriert und weisen eine hervorragende Linearität auf. Die hohe Ortsunabhängigkeit im Mittel-Hochtonbereich erlaubt eine unkomplizierte Platzierung des Lautsprechers im Raum. Mit der gewählten Abstrahlcharakteristik wird für Basisbreiten zwischen 1,50 Meter und 3 Meter ein ausgewogenes Hörerlebnis erzielt.
Der ME 100 eignet sich sehr gut als Front- und Effektlautsprecher in Surroundanlagen. Als Centerlautsprecher wurde der ME 100C entwickelt, welcher durch seine geringe Bauhöhe oftmals besser integriert werden kann. Zudem lässt sich der Lautsprecher durch seine höhenverstellbaren Füße im Gehäuseboden bis zu 15° nach oben neigen, so dass eine perfekte Ausrichtung zum Hörplatz möglich ist. In akustischer und technischer Hinsicht steht der Centerlautsprecher dem ME 100 in nichts nach. In Verbindung mit einem geeigneten AV-Receiver kann die Surroundanlage mit unseren BASIS-Modellen ergänzt werden.
Auf Wunsch liefern wir zum ME 100 einen entsprechend furnierten oder lackierten Standfuß mit integriertem Kabelkanal.
Das Gesamtkonzept der passiven 2-Wege-Koaxiallautsprecher ME 100 und ME 100C bietet eine hohe Klangkompatibilität zur aktiven RL-Baureihe und überzeugt durch eine phänomenale Raumabbildung und Neutralität. Beide Lautsprecher zeichnen sich zudem durch ihr ausgeglichenes und verfärbungsarmes Klangbild sowie ihre hohe Dynamik aus.
Geithain ME 110
€2,250.00*
Der passive 3-Wege-Koaxiallautsprecher ME 110 ist der kleinste Standlautsprecher aus unserer ME-Serie. Seine beiden 5 Zoll Konuslautsprecher, die den tiefen und mittleren Frequenzbereich wiedergeben und durch eine hervorragende Wandlerlinearität überzeugen, sind in einem Bassreflexgehäuse mit nach unten strahlender Austrittsöffnung platziert. Durch diese konstruktive Lösung vereinfacht sich die Positionierung der Lautsprecher zur optimalen Tieftonwiedergabe in Ihrem Hörraum. Im Hochtonbereich arbeitet eine 1 Zoll Hochtonkalotte, die sich koaxial vor dem oberen Tiefmitteltonsystem befindet. Die gewählte Abstrahlcharakteristik sorgt bei Basisbreiten zwischen 1,50 und 3 m in Verbindung mit der koaxialen Anordnung für ein homogenes und natürliches Klangbild. Der Standlautsprecher ME 110 kann mit einem geeigneten AV-Receiver mit unserem Subwoofer BASIS 11K ergänzt werden. Das Gesamtkonzept des passiven 3-Wege-Koaxiallautsprechers ME 110 zeichnet sich durch sein ausgeglichenes und verfärbungsarmes Klangbild und seine Dynamik aus.
Geithain ME 150
€2,950.00*
Die zwei 6,5 Zoll Konuslautsprecher des passiven 3-Wege-Standlautsprechers ME 150 sind für die Wiedergabe der tiefen und mittleren Frequenzen zuständig und überzeugen durch eine hervorragende Wandlerlinearität. Beide Tiefmitteltonsysteme sind in einem Bassreflexgehäuse mit nach unten strahlender Austrittsöffnung platziert. Durch diese konstruktive Lösung vereinfacht sich die Positionierung der Lautsprecher zur optimalen Tieftonwiedergabe in Ihrem Hörraum. Im Hochtonbereich arbeitet eine 1 Zoll Hochtonkalotte, die sich koaxial vor dem oberen Tiefmitteltonsystem befindet. Die gewählte Abstrahlcharakteristik sorgt bei Basisbreiten zwischen 2 und 3,50 m in Verbindung mit der koaxialen Anordnung für ein homogenes und natürliches Klangbild. Der Standlautsprecher ME 150 kann mit einem geeigneten AV-Receiver mit einem Subwoofer aus unserer BASIS-Serie ergänzt werden. Das Gesamtkonzept des passiven 3-Wege-Koaxiallautsprechers ME 150 zeichnet sich durch sein ausgeglichenes und verfärbungsarmes Klangbild und seine hohe Dynamik aus.
Geithain ME 160
€4,750.00*
Der 3-Wege-Koaxiallautsprecher ME 160 wurde für die Wiedergabe von Schallereignissen in akustisch wenig bedämpften Wohnräumen optimiert. Störende Reflexionen an Boden- und Deckenflächen lassen das Klangbild häufig diffus und wenig präzise wirken. Der passive Standlautsprecher ME 160 umgeht dieses Problem durch seine vertikale Bündelung im Mittel- und Hochtonbereich. Erreicht wird diese Abstrahlcharakteristik mittels einer speziellen geometrischen Anordnung der Lautsprechersysteme. Tiefe und mittlere Frequenzen werden von zwei 8 Zoll Konuslautsprechern wiedergegeben, die aus separaten Filterzweigen gespeist werden. Beide Systeme sind in einem Bassreflexgehäuse mit nach unten strahlender Austrittsöffnung platziert. Durch diese konstruktive Lösung vereinfacht sich die Positionierung der Lautsprecher zur optimalen Tieftonwiedergabe in Ihrem Hörraum.Im Hochtonbereich arbeitet der Standlautsprecher mit drei vertikal angeordneten 1 Zoll Hochtonkalotten, die sich vor dem oberen Tiefmitteltonsystem befinden. Resultierend aus dieser Technologie erhöht sich bei gleichzeitiger Vergrößerung des Dynamikumfangs der nutzbare Hörabstand bis auf 5 m. Zusammen mit der koaxialen Anordnung ergibt sich ein homogenes und natürliches Klangbild.
Das Gesamtkonzept des passiven 3-Wege-Koaxiallautsprechers ME 160 zeichnet sich durch einen hohen Wirkungsgrad, Klangneutralität und Dynamik aus.
Geithain ME 180
€8,550.00*
Mit dem ME 180 erweitert Musikelectronic Geithain sein Produktportfolio der passiven High End-Lautsprecher. Das 3-Wege-Konzept besteht aus zwei wirkungsgradstarken 10 Zoll Tief-Mitteltonsystemen und einem Hochtonarray mit drei vertikal angeordneten 1 Zoll Hochtonkalotten. Durch diese Kombination erreicht der ME 180, ganz ohne Schallführung, eine Kennempfindlichkeit von 90 dB. Gemeinsam mit der Impedanzlinearisierung wird er auch für Röhrenverstärker zum perfekten Zusammenspieler. Powerkompression und nichtlineare Verzerrungen liegen deshalb selbst bei Fortissimopassagen auf sehr geringem Niveau. Die Richtcharakteristik des Systems ist auf Hörentfernungen zwischen 3 und 6 Metern optimiert, so dass sich ein natürliches Klangbild bei Stereo- und Mehrkanalbetrieb einstellt. Das auf impulstreue optimierte Bassreflexsystem sorgt für eine präzise und trockene Tieftonwiedergabe bis zu einer unteren Grenzfrequenz von 35 Hz. Es ist möglich, die Bassreflexöffnungen zu verschließen und somit bei wandnaher Aufstellung eine Überhöhung im Bass zu vermeiden.
Oft verwendete Schallführungen vor Hochtonsystemen ermöglichen eine einfache Steuerung der Richtcharakteristik, neigen jedoch zu unvermeidbaren Klangverfärbungen. Diese entstehen durch Kurzzeitreflexionen an der Horninnenfläche. Musikelectronic Geithain geht mit dem Einsatz eines Hochtonarrays andere Wege und verzichtet zur Schallpegelerhöhung auf Systeme mit Hornlautsprechern. Die koaxial vor dem Mitteltonsystem angeordnete Hochtoneinheit garantiert die gewohnte, verfärbungsarme Reproduktion von Musik und Sprache und erzeugt die vom Hörer gewünschte Nähe zum Schallereignis.
Der ME 180 lässt sich auf die akustischen Gegebenheiten im Hörraum anpassen. Gerade für moderne Wohnräume mit gehobenen Nachhallzeiten im Mitteltonbereich ist die Anhebung der Schallleistung im Präsenzbereich und eine Absenkung bei 200 Hz möglich.Durch die Summe der konstruktiven Maßnahmen erreicht der ME 180 die nahtlose, klangliche Kompatibilität zu allen anderen Produkten aus dem Hause Geithain. Die hohe Klangfarbenneutralität, exzellente Räumlichkeit und Tiefenstaffelung sowie das ermüdungsfreie Abhören selbst komplexester Schallereignisse zeichnen auch diesen Lautsprecher aus.Durch das ansprechende Design und die große Auswahl verschiedenster Echtholzfurniere bzw. Lackoberflächen in Hochglanz- oder Seidenmattoptik fügt sich der Lautsprecher exzellent in Ihren Hörraum ein.
Geithain ME 25
€950.00*
Der 2-Wege-Koaxiallautsprecher ME 25 ist der kompakteste Passiv-Lautsprecher aus unserer ME-Serie. Sein 5 Zoll Tiefton- und 1 Zoll Hochtonsystem sind in einem Bassreflexgehäuse integriert und weisen eine hervorragende Wandlerlinearität auf. Der ME 25 eignet sich sehr gut als Front- und Effektlautsprecher in 5.1 Surroundanlagen und kann in Verbindung mit einem geeigneten AV-Receiver mit unserem Subwoofer BASIS 11K ergänzt werden. Die hohe Ortsunabhängigkeit im Mittel-Hochtonbereich erlaubt eine unkomplizierte Platzierung des Lautsprechers im Raum. Die gewählte Abstrahlcharakteristik sorgt bei Basisbreiten zwischen 1 und 3 m für ein ausgewogenes Hörerlebnis. Es besteht die Möglichkeit, den ME 25 liegend zu betreiben. Auf Wunsch kann ein entsprechend furnierter Standfuß mit integriertem Kabelkanal geliefert werden.
Das Gesamtkonzept des passiven 2-Wege-Koaxiallautsprechers ME 25 zeichnet sich durch seine geringen Abmessungen, sein ausgeglichenes und verfärbungsarmes Klangbild und seine hohe Dynamik aus.
Lipinski Sound L-707
€4,275.00*
" ... the best louspeakers I`ve ever heard .. " - Bob Katz, Chief Engineer, Digital Domain in Florida, June 2004
A sealed enclosure tuned for the best impulse response rather than a low-end extension. We strongly believe that various kinds of vented enclosures always cause coloration that does not deliver reference accuracy.
Sturdy enclosure made of 1" (25mm) thick MDF with internal bracing to bring unwanted resonance and box coloration to an almost nonexistent level.
Stiff Glass Fiber Cone mid-woofers with low dampening rubber surround, diecast chassis, and a low distortion magnet.
Neodymium Ring Radiator - super low distortion tweeters with frequency response up to 40kHz and extra wide dispersion.
The absence of a grill in front of the tweeter. Our laboratory and listening tests prove that even the most transparent grill fabric causes high frequency comb filtering.
An acoustic, rather than an electronic, time-coherence of tweeters.
Unique tweeter surrounding. Perfecting the tweeter environment appeared quite possibly to be the most challenging aspect of the design. The goal was to eliminate the edging effect by carefully shaping the tweeter surrounding with specially designed Belgian foam.
A low-order crossover for the best phase response. We also selected the lowest possible crossover point to deliver the best transient response.
Premium quality crossover parts. Foil Inductors wound on a wooden core - with their skin effect conductivity - provide performance unmatched by less expensive wire wound coils, and provide much lower coloration than iron core inductors. We also use non-inductive resistors, premium audiophile grade capacitors and special flat, Super OFC internal wires.
Matching internal dampening design. Internal dampening is outsourced and precut to absolutely identical shape and weight for the best speaker-to-speaker consistency.
Dual, all-brass, gold-plated posts, which accept banana plugs or up to 2 AWG wires.
Magnetic Shielding. All our speakers are magnetically shielded for demanding pro video applications.
All parameters perfected in anechoic chamber.
Lipinski Sound L-707A (Passive)
€5,619.00*
Lipinski Sound L-707AOne Segment Monitor, expandable to two and three segments. The L-707A is a new version of Lipinski's renowned L-707, with the following upgrades:
A larger cabinet allows for smoother midrange and extended bass
A thicker, 1.25" (30 mm) MDF with internal bracing further eliminates resonances
Cost-no-object tweeter capacitors
Custom tweeter designed to Lipinski specifications
Custom mid-woofers which further smoothes frequency response and lowers distortion
This is a passive monitor speaker, meaning you need an additional amplifier, e. g. the Lipinski L-700A (see: Sidebar Related Products).
Lipinski Sound L-707A Grand (Passive)
€11,245.00*
Lipinski Sound L-707A Grand Studio Monitor
Feature
By adding one mid-woofer segment on the bottom, or on the top of L-707A to peer above a console, it eliminates the need For
a separate subwoofer. Provides for a fully integrated, full-bandwidth Loudspeaker.
Five -woofers work together. This combination eases the load on all midrange drivers lowering distortion by 50% up to crossover point at over 2 kHz, and extends bass, to the point equivalent to having one 15" woofer per side.
Unique neodymium magnet sign anoints and mechanical stabilizers (patent pending), trouble connection for low impedance and smooth signal transition. Extremely simple mechanical assemblage: just stack it, and the magnets connect by themselves.
Not required: terminals/wires/assembly/tooling
Provided: convenience / reliability / ergonomics / smooth signal transition
Specifications:
One 1” (25mm) custom Neodymium Ring Radiator tweeterFive 7" (180mm) custom Glass Fiber Mid-Woofers In MTM configuration
Frequency response 43Hz-20kHz +/- 1 dB (24Hz-40kHz +/- 3 dB)
Speaker-to-speaker consistency: +/- 1/4 dB
IEC Power Handling: 400W
SPL: 90.5 dB lW/lm Impedance 6 Ohms
Dimensions: 51 7/8” H x 10” W x 14 1/4” / 21” D (1317 mm x 256 mrn x 362 / 534 mm)
Height provided without pedestal
Weight: 106.7 lbs (48 kg)
This is a passive monitor speaker, meaning you need an additional amplifier, e. g. the Lipinski L-700A or L-700B (see: Sidebar Related Products).
Lipinski Sound L-707A Signature (Passive)
€16,865.00*
Lipinski Sound L-707A Signature Studio Monitor
Lipinski's intent was to design the most linear and the best sounding monitoring system ever built worldwide, money no object.
The first Signature system was installed at World-renowned Universal Studios of Hollywood:
"My staff of highly trained, and experienced audio engineers - and all of our clients - consider the Lipinski's to be the best sounding, and most accurate monitors they have experienced in their careers." says Senior Director of Studio Operations, Nick Dofflemyer.
By adding yet another mid-woofer segment that provides for eight identical mid woofers, instead of five, you achieve:
1. Completely unrestricted bass performance. Equivalent to two 15" drivers per side.
2. Four times as many mid-woofers equals four times less amplitude which results in four times less distortion up to over 2 kHz.
Specifications:
One 1" (25mm) custom Neodymium Ring Radiator tweeter
Eight 7” (l00mm} custom Glass Fiber Mid-Woofers in MTM configuration
Frequency response: 37Hz-20kHz +/- 1 dB (20Hz-40kHz +/- 3 dB)
Speaker-to-speaker consistency: +/- 1/4 dB
IEC Power Handling: 600W
SPL: 90.5 dB lW/lm
Impedance: 8 Ohms
Dimensions: 79 7/16” H x 10” W x 21" D (2018mm x 256mm x 234mm)
Height provided without pedestal
Weight: 165.6 lbs (74,5 kg)
This is a passive monitor speaker, meaning you need an additional amplifier, e. g. the Lipinski L-700A or L-700B (see: Sidebar Related Products).
See also:
L-700A: Attachable Dual Power AmplifierL-700B: Attachable Midwoofer Power Amplifier