Lapel Microphones
ME 104-ANT ME 104 modular mini-microphone system, anthraciteGeneral DescriptionThe ME 102/104/105 modular mini-microphone system fulfils professional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications. Scratch-resistant matt finish: anthracite or nickel. Features Excellent speech clarity Gently falling frequency response curve at low frequencies ensures good rejection of handling and wind noise Minimal inherent self-noise Omni-directional or cardioid microphone capsules, can be quickly interchanged Optionally available with right-angled plug (copper wire cable, extremely insensitive to handling noise) or with straight plug (steel wire cable, very resistant to tearing) Technical Data Pick-up pattern cardioid Sensitivity in free field, no load (1kHz) 8 mV/Pa +- 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4700 Ohm Equivalent noise level 30 dB Equivalent noise level weighted as per CCIR 468-3 38 dB Current consumption ca. 250 µA Dimensions d 6 x 12 mm Weight w/o cable 1 g
Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs tobe virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, theMKE 1 stands up better than other clip-on microphones to harshlive conditions. Its special gauze and multi-purpose cap offeradditional protection from moisture so that it only picks up whatit is meant to pick up – perfect sound. The MKE 1 is robust in everyrespect. The Kevlar™ reinforced cable with moulded anti-kink sleeveminimises handling noise and makes this a microphone you can relyupon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape
MKE 1 white, incl. 3-pol Lemo connector, 1.6m Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs tobe virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, theMKE 1 stands up better than other clip-on microphones to harshlive conditions. Its special gauze and multi-purpose cap offeradditional protection from moisture so that it only picks up whatit is meant to pick up – perfect sound. The MKE 1 is robust in everyrespect. The Kevlar™ reinforced cable with moulded anti-kink sleeveminimises handling noise and makes this a microphone you can relyupon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape Technical Data: Pick-up pattern (Clip-on microphone) omni-directional Frequency response 20 - 20000 Hz ± 2,5 dB Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4,7 kOhm Equivalent noise level 27 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (mains) -4 and -4-3: through transmitters SK 5212, SK 5012, SK 250, SK 50, SK 3063; -5 and -5-3: 4,5 - 15 V Cable length -4 and -4-3: 1,6 m; -5 and -5-3: 3 m Colour -4 and -5: black; -4-3 and -5-3: beige Diameter 3,3 mm Gewicht ohne Kabel und ohne Stecker 0,1 g
MKE 1 brown, incl. 3-pol Lemo connector, 1.6m Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs tobe virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, theMKE 1 stands up better than other clip-on microphones to harshlive conditions. Its special gauze and multi-purpose cap offeradditional protection from moisture so that it only picks up whatit is meant to pick up – perfect sound. The MKE 1 is robust in everyrespect. The Kevlar™ reinforced cable with moulded anti-kink sleeveminimises handling noise and makes this a microphone you can relyupon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape Technical Data: Pick-up pattern (Clip-on microphone) omni-directional Frequency response 20 - 20000 Hz ± 2,5 dB Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4,7 kOhm Equivalent noise level 27 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (mains) -4 and -4-3: through transmitters SK 5212, SK 5012, SK 250, SK 50, SK 3063; -5 and -5-3: 4,5 - 15 V Cable length -4 and -4-3: 1,6 m; -5 and -5-3: 3 m Colour -4 and -5: black; -4-3 and -5-3: beige Diameter 3,3 mm Gewicht ohne Kabel und ohne Stecker 0,1 g
MKE 1 light beige, paintable, incl. 3-pol Lemo connector, 1,6m Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs tobe virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, theMKE 1 stands up better than other clip-on microphones to harshlive conditions. Its special gauze and multi-purpose cap offeradditional protection from moisture so that it only picks up whatit is meant to pick up – perfect sound. The MKE 1 is robust in everyrespect. The Kevlar™ reinforced cable with moulded anti-kink sleeveminimises handling noise and makes this a microphone you can relyupon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape
Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs to be virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, the MKE 1 stands up better than other clip-on microphones to harsh live conditions. Its special gauze and multi-purpose cap offer additional protection from moisture so that it only picks up what it is meant to pick up – perfect sound. The MKE 1 is robust in every respect. The Kevlar™ reinforced cable with moulded anti-kink sleeve minimises handling noise and makes this a microphone you can rely upon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape Technical Data: Pick-up pattern (Clip-on microphone) omni-directional Frequency response 20 - 20000 Hz ± 2,5 dB Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4,7 kOhm Equivalent noise level 27 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (mains) -4 and -4-3: through transmitters SK 5212, SK 5012, SK 250, SK 50, SK 3063; -5 and -5-3: 4,5 - 15 V Cable length -4 and -4-3: 1,6 m; -5 and -5-3: 3 m Colour -4 and -5: black; -4-3 and -5-3: beige Diameter 3,3 mm Gewicht ohne Kabel und ohne Stecker 0,1 g Varients: MKE 1-5 MKE 1 black, open ended cable, 3mMKE 1-5-1 MKE 1 white, open ended cable, 3mMKE 1-5-2 MKE 1 brown, open ended cable, 3mMKE 1-5-3MKE 1 beige, open ended cable, 3m
Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs to be virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, the MKE 1 stands up better than other clip-on microphones to harsh live conditions. Its special gauze and multi-purpose cap offer additional protection from moisture so that it only picks up what it is meant to pick up – perfect sound. The MKE 1 is robust in every respect. The Kevlar™ reinforced cable with moulded anti-kink sleeve minimises handling noise and makes this a microphone you can rely upon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape Technical Data: Pick-up pattern (Clip-on microphone) omni-directional Frequency response 20 - 20000 Hz ± 2,5 dB Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4,7 kOhm Equivalent noise level 27 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (mains) -4 and -4-3: through transmitters SK 5212, SK 5012, SK 250, SK 50, SK 3063; -5 and -5-3: 4,5 - 15 V Cable length -4 and -4-3: 1,6 m; -5 and -5-3: 3 m Colour -4 and -5: black; -4-3 and -5-3: beige Diameter 3,3 mm Gewicht ohne Kabel und ohne Stecker 0,1 g Varients: MKE 1-5 MKE 1 black, open ended cable, 3mMKE 1-5-1 MKE 1 white, open ended cable, 3mMKE 1-5-2 MKE 1 brown, open ended cable, 3mMKE 1-5-3MKE 1 beige, open ended cable, 3m
Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs to be virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, the MKE 1 stands up better than other clip-on microphones to harsh live conditions. Its special gauze and multi-purpose cap offer additional protection from moisture so that it only picks up what it is meant to pick up – perfect sound. The MKE 1 is robust in every respect. The Kevlar™ reinforced cable with moulded anti-kink sleeve minimises handling noise and makes this a microphone you can rely upon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape Technical Data: Pick-up pattern (Clip-on microphone) omni-directional Frequency response 20 - 20000 Hz ± 2,5 dB Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4,7 kOhm Equivalent noise level 27 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (mains) -4 and -4-3: through transmitters SK 5212, SK 5012, SK 250, SK 50, SK 3063; -5 and -5-3: 4,5 - 15 V Cable length -4 and -4-3: 1,6 m; -5 and -5-3: 3 m Colour -4 and -5: black; -4-3 and -5-3: beige Diameter 3,3 mm Gewicht ohne Kabel und ohne Stecker 0,1 g Varients: MKE 1-EWMKE 1 black, incl. TRS connector, 1,6mMKE 1-EW-1MKE 1 white, incl. TRS connector, 1,6mMKE 1-EW-2MKE 1 brown, incl. TRS connector, 1,6mMKE 1-EW-3MKE 1 beige, incl. TRS connector, 1,6m
Our smallest Sound Pro.Whether for musicals and live shows, or for broadcasting applications,the MKE 1 – Sennheiser’s smallest clip-on microphone –performs at its best in all situations where a microphone needs to be virtually invisible and still offer outstanding sound quality. Reliability:Sweat protected by a newly developed protective membrane, the MKE 1 stands up better than other clip-on microphones to harsh live conditions. Its special gauze and multi-purpose cap offer additional protection from moisture so that it only picks up what it is meant to pick up – perfect sound. The MKE 1 is robust in every respect. The Kevlar™ reinforced cable with moulded anti-kink sleeve minimises handling noise and makes this a microphone you can rely upon completely. Features Great strengths – small microphone Very small dimensions (3.3 mm capsule diameter) High maximum sound pressure level (142 dB) Very high speech intelligibility; clear, pleasant treble Full, natural sound with low ambient noise Thin (1 mm diameter) and robust cable; flexible with minimum handling noise Very sweat-resistant due to protective membrane Flexible tubes for attaching the microphone with clips or adhesive tape Technical Data: Pick-up pattern (Clip-on microphone) omni-directional Frequency response 20 - 20000 Hz ± 2,5 dB Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2,5 dB Nominal impedance 1000 Ohm Min. terminating impedance 4,7 kOhm Equivalent noise level 27 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (mains) -4 and -4-3: through transmitters SK 5212, SK 5012, SK 250, SK 50, SK 3063; -5 and -5-3: 4,5 - 15 V Cable length -4 and -4-3: 1,6 m; -5 and -5-3: 3 m Colour -4 and -5: black; -4-3 and -5-3: beige Diameter 3,3 mm Gewicht ohne Kabel und ohne Stecker 0,1 g Varients: MKE 1-EWMKE 1 black, incl. TRS connector, 1,6mMKE 1-EW-1MKE 1 white, incl. TRS connector, 1,6mMKE 1-EW-2MKE 1 brown, incl. TRS connector, 1,6mMKE 1-EW-3MKE 1 beige, incl. TRS connector, 1,6m
General DescriptionThe MKE 2-4 Gold-C is a high-quality, sub-miniature clip-on lavalier microphone which is suitable for both speech and instrument miking applications in all areas of live work. It fulfils the most stringent demands on sound quality and is extremely rugged. A special Umbrella Diaphragm™ and a welded housing protect the MKE 2 Gold against sweat and moisture, making it an ideal choice for theatrical productions. Colour: matt black.Features New Umbrella Diaphragm™ protects the mic against sweat Very high sound pressure handling capability Versatile attachment due to an extensive range of accessories Delivery Includes 1 MKE 2-4 Gold-C clip-on microphone 1 MZC 2-1 cap (short) 1 MZC 2-2 cap (long) Technical Data Transducer principle (Microphone) pre-polarised condenser microphone Pick-up pattern omni-directional Frequency response (microphone) 20.....20000 Hz +- 3 dB Sensitivity in free field, no load (1kHz) 5 mV/Pa +- 3 dB Nominal impedance 1000 Ohm Min. terminating impedance 4700 Ohm Equivalent noise level 26 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (stand alone) 7,5 V Current consumption ca. 250 µA Connection cable LEMO f. SK50/250 Cable length 1,6 m Dimensions d 4,8 mm Varients: MKE 2-4 GOLD-C with 3-pol Lemo connector, cable length 1.6 m, blackMKE 2-4-3 Gold-C with 3-pol Lemo connector, cable length 1.6 m, beige
General DescriptionThe MKE 2-4 Gold-C is a high-quality, sub-miniature clip-on lavalier microphone which is suitable for both speech and instrument miking applications in all areas of live work. It fulfils the most stringent demands on sound quality and is extremely rugged. A special Umbrella Diaphragm™ and a welded housing protect the MKE 2 Gold against sweat and moisture, making it an ideal choice for theatrical productions. Colour: matt black.Features New Umbrella Diaphragm™ protects the mic against sweat Very high sound pressure handling capability Versatile attachment due to an extensive range of accessories Delivery Includes 1 MKE 2-4 Gold-C clip-on microphone 1 MZC 2-1 cap (short) 1 MZC 2-2 cap (long) Technical Data Transducer principle (Microphone) pre-polarised condenser microphone Pick-up pattern omni-directional Frequency response (microphone) 20.....20000 Hz +- 3 dB Sensitivity in free field, no load (1kHz) 5 mV/Pa +- 3 dB Nominal impedance 1000 Ohm Min. terminating impedance 4700 Ohm Equivalent noise level 26 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (stand alone) 7,5 V Current consumption ca. 250 µA Connection cable LEMO f. SK50/250 Cable length 1,6 m Dimensions d 4,8 mm Varients: MKE 2-4 GOLD-C with 3-pol Lemo connector, cable length 1.6 m, blackMKE 2-4-3 Gold-C with 3-pol Lemo connector, cable length 1.6 m, beige
General DescriptionThe MKE 2-4 Gold-C is a high-quality, sub-miniature clip-on lavalier microphone which is suitable for both speech and instrument miking applications in all areas of live work. It fulfils the most stringent demands on sound quality and is extremely rugged. A special Umbrella Diaphragm™ and a welded housing protect the MKE 2 Gold against sweat and moisture, making it an ideal choice for theatrical productions. Colour: matt black.Features New Umbrella Diaphragm™ protects the mic against sweat Very high sound pressure handling capability Versatile attachment due to an extensive range of accessories Delivery Includes 1 MKE 2-4 Gold-C clip-on microphone 1 MZC 2-1 cap (short) 1 MZC 2-2 cap (long) Technical Data Transducer principle (Microphone) pre-polarised condenser microphone Pick-up pattern omni-directional Frequency response (microphone) 20.....20000 Hz +- 3 dB Sensitivity in free field, no load (1kHz) 5 mV/Pa +- 3 dB Nominal impedance 1000 Ohm Min. terminating impedance 4700 Ohm Equivalent noise level 26 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (stand alone) 7,5 V Current consumption ca. 250 µA Connection cable LEMO f. SK50/250 Cable length 1,6 m Dimensions d 4,8 mm Varients: MKE 2-5 Gold-C with open-ended cable, cable length 4 m, blackMKE 2-5-3 Gold-Cwith open-ended cable, cable length 4 m, beige
General DescriptionThe MKE 2-4 Gold-C is a high-quality, sub-miniature clip-on lavalier microphone which is suitable for both speech and instrument miking applications in all areas of live work. It fulfils the most stringent demands on sound quality and is extremely rugged. A special Umbrella Diaphragm™ and a welded housing protect the MKE 2 Gold against sweat and moisture, making it an ideal choice for theatrical productions. Colour: matt black.Features New Umbrella Diaphragm™ protects the mic against sweat Very high sound pressure handling capability Versatile attachment due to an extensive range of accessories Delivery Includes 1 MKE 2-4 Gold-C clip-on microphone 1 MZC 2-1 cap (short) 1 MZC 2-2 cap (long) Technical Data Transducer principle (Microphone) pre-polarised condenser microphone Pick-up pattern omni-directional Frequency response (microphone) 20.....20000 Hz +- 3 dB Sensitivity in free field, no load (1kHz) 5 mV/Pa +- 3 dB Nominal impedance 1000 Ohm Min. terminating impedance 4700 Ohm Equivalent noise level 26 dB Equivalent noise level weighted as per CCIR 468-3 39 dB Maximum sound pressure level (passiv) 142 dB Operating voltage (stand alone) 7,5 V Current consumption ca. 250 µA Connection cable LEMO f. SK50/250 Cable length 1,6 m Dimensions d 4,8 mm Varients: MKE 2-5 Gold-C with open-ended cable, cable length 4 m, blackMKE 2-5-3 Gold-Cwith open-ended cable, cable length 4 m, beige
Microphone, omnidirectional, with phantom power adapter, 3 m cable, charcoal, without accessories
With miniature coaxial connector for direct connection to Mikroport transmitters SK 50 or SK 250. General DescriptionClip-on microphone with cardioid pattern.Features High gain before feedback Very good speech intelligibility Outstanding bass reproduction Delivery Includes 1 mikrophone MKE 40-ew 1 Clip 1 windscreen, black 1 windscreen, grey 1 magnet holder set MZM 2 / MZM 10 Technical Data Frequency response 40...20.000 Hz Sensitivity as per 121 TR 9-5 42 mV/Pa +- 3dB Maximum sound pressure level (passiv) 118 dB (k=1%) Pick-up pattern cardioid Dimensions d=12mm, l=26mm