Avedis MD7
Product information "Avedis MD7"
- Gain range from 0dB – 64dB in 4dB steps for recall-ability
- Input Trim control for fine control of gain
- No input PAD to drive transformer into saturation during peaks
- Utilizes the discrete 1122 op-amp known for depth and resolution
- All discrete design with Class A buffer amplifier
- Line Input to interface with DAW’s
- Custom Jensen input & output transformers
- SEND feature to run signal through stomp boxes for variety of effects
- Wide bandwidth, high headroom, very low noise
- Phase reverse, and filtered 48V phantom power
- High Pass Filter using a gentle slope for natural bass roll-off (-3dB @ 80Hz)
- 10 Meg-ohm high impedance DI input great for all instrument pickups
- Perfect for using as a re-amplification device
- Designed and manufactured in Los Angeles
| Safety Warnings: | Die spezifischen Sicherheitshinweise für das Produkt sind in dessen Bedienungsanleitung aufgeführt. |
|---|
Avedis
Avedis Audio Electronics
3857 Foothill Blvd #1B La Crescenta, CA 91214
https://avedisaudio.com/
Frequency Response <10Hz to -3dB at 75kHz
Mic Input Impedance ≅1500 ohms
Line Input Impedance 10k ohms
Output Impedance <75 ohms
DI Input Impedance 10M Ohms
SEND Output Impedance 300 Ohms
Common Mode Rejection Ratio >123dB min @ 60Hz
Maximum Output Level +28.8 dBu @ 100KΩ, +27.4 dBu @ 600Ω
Power Requirements ±16 vdc @ 35mA per rail
Gain Voltage 0 to 22 Volts
Gain dB 0 to 64.7 dB
Equivalent Input Noise −114 dBu; Unweighted 300kHz bandwidth
Weight 2.6 lbs / 1.18kg
Mic Input Impedance ≅1500 ohms
Line Input Impedance 10k ohms
Output Impedance <75 ohms
DI Input Impedance 10M Ohms
SEND Output Impedance 300 Ohms
Common Mode Rejection Ratio >123dB min @ 60Hz
Maximum Output Level +28.8 dBu @ 100KΩ, +27.4 dBu @ 600Ω
Power Requirements ±16 vdc @ 35mA per rail
Gain Voltage 0 to 22 Volts
Gain dB 0 to 64.7 dB
Equivalent Input Noise −114 dBu; Unweighted 300kHz bandwidth
Weight 2.6 lbs / 1.18kg